Skip to main content

WM Housing LED Flood light 30W

1、Use toughened glass and the light transmittance is about 93%.
2、LED driver contact with the heatsink directly and the heat dissipation is much stronger.With casette structure, it is easy to install LED lighting, efficient for mass production.The cooling structure is under patent protection (included the appearance).
3、Projection angle could be adjusted willingly with base stand.
4、Energy saving system,sacing 50% energy than the conventional Metal halide lamp,Sodium Light or HPS light.
5、No UV&ip.No Blinking and No Mercury &Lead free.
6、2 years warranty for all the series.

Common Characteristics 
 
Model No.
Voltage
Total Power
Quantity of led
Lifespan
CCT
Lumen Efficiency
CRI
Viewing Angle
IP Rating
Material
WM-FACIN-30W
AC100-240V
32.7W
1PCS 
50000H
2700-7300K
95-100lm/w
≥80Ra
118°x90°
IP65
ASA+AL+Glass
 
 
product dimension 



Color
 


Installation

 
 
Step 1: Power must be cut off before installation, it's not allowed to do all this power on.
Step 2: Put two screws on where required the same size position A what it's indicated in the diagram.
Step 3: Turn up to any beam angle needed by rotating the lamp body.
Step 4: Make connection of Blue with L line, Brown with N line and yellow green wires with Earth line, turn it on when it's connected properly.