WM Housing LED Flood light 10W

1、Use toughened glass and the light transmittance is about 93%.

2、LED driver contact with the heatsink directly and the heat dissipation is much stronger.With casette structure, it is easy to install LED lighting, efficient for mass production.The cooling structure is under patent protection (included the appearance).

3、Projection angle could be adjusted willingly with base stand.

4、Energy saving system,sacing 50% energy than the conventional Metal halide lamp,Sodium Light or HPS light.

5、No UV&ip.No Blinking and No Mercury &Lead free.
6、2 years warranty for all the series.

Common Characteristics 
​

Model No.	Voltage	Total Power	Quantity of led	Lifespan	CCT	Lumen Efficiency	CRI	Viewing Angle	IP Rating	Material
WM-FACIN-10W	AC100-240V	11.2W	1PCS	50000H	2700-7300K	95-100lm/w	≥80Ra	120°x106°	IP65	ASA+AL+Glass

 
Step 1: Power must be cut off before installation, it's not allowed to do all this power on.
Step 2: Put two screws on where required the same size position A what it's indicated in the diagram.
Step 3: Turn up to any beam angle needed by rotating the lamp body.
Step 4: Make connection of Blue with L line, Brown with N line and yellow green wires with Earth line, turn it on when it's connected properly.